Integrate Long-term Company Strategy With Short Term Proposal Pricing Objectives
‘SMALTOFEDS’ By Ken Larson
“Small businesses entering or growing into federal contacting often struggle with developing a pricing approach. They must design a pricing structure to pass an audit and win competitively. A winning strategy for federal services contracting must involve a view of the horizon as well as the instant bid on the table.“
________________________________________________________________________________
“If you are a small enterprise selling off-the-shelf commercial items under FAR Part 12 or marketing commercial products on a GSA schedule, you may be initially challenged by the government contracting venue. With persistence you will establish selling relationships through agencies and prime contractors. Your pricing challenge is minimal. A service contractor faces a far greater challenge in understanding the nature of government contact pricing and winning at it.
Strategic thinking must therefore be applied to structuring a government service contracting cost center in your company. It must involve long term planning and designing a business system as well as establishing rates and factors to bid new work.
LONG TERM COMPANY STRATEGY
Build a Business System With Pricing in Mind:
We have previously discussed the basics of small business government contracting business system design: Job Cost
The structure or your pricing approach from the cost element level through burdens must use the same template as your job cost accounting and billing. The parallel mapping provides the consistency required to pass audits or get your billings approved on a service contract.
Please read the above article and its related references. Then design your processes recognizing the guidance there and applying it to your company organization, and the way you produce your supplies and services.
Sculpt the DCAA Auditor
As you begin submitting government contracting proposals you will encounter your local DCAA audit office. They learn about your company by auditing your cost proposal rates, job cost processes and systems, billings and contract closeouts.
Keep in mind that you are shaping opinions in these encounters on the part of these government personnel that will influence your future and be passed on in reports to contracting officers. Your unique company business system structure must be carefully explained to them against what they know best; their DCAA Audit manual and FAR Cost Accounting Standards:
Protect Rate Information
Your fully loaded rates will appear on your GSA schedule in the public domain, in subcontracts from prime contractors and in data acquired under the Freedom of Information Act (FOIA) by competitors.
It is generally recognized by all industries participating in federal government contracting that internal overhead and G&A rates and the data that support them are proprietary data. The reason for the proprietary nature of rate data between companies is that in government work firms are teaming with each other exclusively on one project and competing against each other on additional contracts or projects at the same time.
Companies do not disclose the details of their rates to other companies and they do not expect to see another company’s proprietary rate information. So companies view each others rate information on a fully loaded basis, meaning the total of the base cost, any proprietary indirect cost and an agreed upon profit percent.
If a prime contractor requests that subcontractor proprietary rate information be supplied with a proposal the detail should be double wrapped and the package stamped, ‘Government Eyes Only’. The prime will then hand the package off to DCAA without opening it and receive only the fully loaded result of the burdened rate pricing.
For further information on intellectual property protection and protective markings on government contract proposals please see the following article:
Recognize Overhead and G&A Rates Are Critical
Assuming your competition pays a generally similar labor rate to their employees as you do and that fringe costs about the same for everyone, then overhead and G&A are what wins and loses contracts.
Please read the following articles carefully with regard to long range planning and setting your overhead and G&A rates:
Keep in mind that if you are performing work inside a government facility the government will expect to be charged a lower overhead rate than if you were paying the space and occupancy costs and the light bill. This is normally achieved by establishing a separate cost center for “On site” (Internal to government quarters) work with lower overhead expenses applied to project direct labor dollars in that cost center.
Price Set Aside Contracts the Same as Full and Open Competitions
If you are a small business lucky enough to receive a sole source set aside contract under an 8(a) or Hub Zone award, or if you are participating in limited competition under a small business set aside designation, use the same sharp pencil you use on the full and open market. Your goal is to compete for the long haul and inflating estimates on particular jobs due to limited competition has an inflationary effect on your business as a whole.
Your company past performance is being constantly evaluated by the government and prime contractor community. Consistency attains and retains new business. You will eventually grow to the point where set asides and sole sourcing will no longer be available; prepare early.
Know the True Value of Your Proposal
Develop risk thresholds (ceiling and floor) for your bids. The ceiling is the price for which you can bid a job, perform to meet specifications and win. A floor is the lowest possible price for which you can accept a contract and survive.
Do not bid or be negotiated out of these thresholds. “Buying In” does not work and sacrificing the future of your company by “Low Balling” cost proposals and hoping to get well on scope changes later is dangerous.
In government contracting the only worse scenario than losing a contract is winning it, performing poorly (cost, schedule or technical) and getting a black eye on your company past performance record that takes a long time to go away.
Understand a Proposal is the Opening Chapter a Baseline for Your Contract
Your proposal represents an initial offer to a government agency or a prime contractor. Please read the following articles on how this baseline is initially set and controlled through the negotiation process and ultimately through careful contract management.
SHORT TERM PROPOSAL OBJECTIVES
Make Bid/No Bid Decisions Wisely
Conduct your bid/no bid decisions effectively. Please see the bid/no bid analysis process at the beginning of the following article:
Be Conservative in Rough Order of Magnitude Pricing
A common government planning technique in the early phases of marketing is to ask questions and review and approve a concept paper by a company then informally request for “Planning Purposes”, a rough order of magnitude cost estimate (ROM).
If you provide a ROM be very careful. It tends to get cast in concrete in the customer’s mind, even though it is not the final, formal proposal. Make it conservative in cost content and schedule duration, then plan to beat it with your formal proposal.
Make sure you caveat the ROM if you are asked for it with the statement in your cover letter that it is for planning purposes only and is not a commitment on the part of your company. State that you will be happy to make a full formal proposal/commitment upon receipt of a formal RFP from an authorized contracting officer. Keep in mind that contracting officers are the only people who can commit the government:
The government usually goes forward with the concept paper and the ROM for approval of the funding necessary for the job. The “Agency Higher Ups” either give the project personnel the approval to do a set aside or they require a competitive procurement.
You may want to read the following article on Statements of Work:
Know the Difference Between Firm, Fixed Price, Time and Materials and Cost Plus Contracting
During the solicitation and proposal process the contract type is specified.
Firm, Fixed Price (FFP) is the riskiest type of contracting and should be undertaken only when you have a definitive grasp of a precise statement of work with known variables and end products. You should have achieved similar work scope in the past or be delivering follow-on products and services that are mature in nature to undertake a firm, fixed price contract.
FFP is particularly risky in software development contracts or high technology program pressing the state of the art. You will receive no more in the form of funding than your bid price on a firm, fixed price contract.
Time and Materials (T&M) contracting places the risk on the government and is suited to long term service contracts of a development nature. T&M may be contracted with fixed labor rates, making the hours and pass through materials and other direct costs the only variables.
Cost Plus (CP) contracting is the least risky of all contract types and you are assured of receiving every dollar of cost incurred under this type of contract.
The lower the risk to the contractor the lower the expected negotiated profit rate you can expect, since the government considers risk the principal factor in profit negotiation.
For further explanation of contract types in more detail, please see the following article:
Develop a Price Profile of the Competition
Use a copy of your own forward pricing long range plan (LRP) to model your strongest competitors. Profile your best intelligence regarding their size, location, contract base and estimated overhead and G&A expenses. Then interpolate, from your knowledge of the market, their labor and fringe costs, as well as other direct costs as you prepare your proposal. Incorporate any unique approaches you estimate your competition may offer that impact cost.
Adjust your competitor cost model to perform “What If Analysis” during your risk assessment and proposal review process. For an example of an LRP cost model please see the Box Net Cube in the left margin of this site: Small Business Federal Government Contracting It is Appendix B to the book, “Small Business Federal Government Contracting” and is available as a free download in Adobe format from the BOX in the right margin of the site.
Understand “Best Value” Source Selection
When the government declares a “Best Value” proposal award process the agency will perform a weighted trade study of cost verses technical and management factors in reviewing proposals. They will announce the weight of each factor in relative terms within the solicitation so contractors can focus on the most important elements.
What best value means quite simply is that if you are the low price bidder you may not win. If a competitor proposes a superior technical and management approach, a higher weighted rating in those factors may offset an otherwise non-competitive bid price, resulting in an award. This is a fact you must keep in mind when preparing your own proposal. In short you must perform your own trade study on your own bid.
Past performance has also become a significant weight factor in proposal evaluations in recent years. To address this challenge, please see the following article:
A balanced proposal, with specific, heavy emphasis on government-designated weight factors and an economical, yet realistic cost/price usually wins. Offsetting weaknesses in any designated government weighted area by proposing excellence in other weighted areas is vital.
Beware of Unallowable Costs
Over the years the federal government has determined that certain costs cannot be allowed in prices, cost reimbursements or settlements under contracts with the US Government. The government is unwilling to pay for these costs as direct charges to federal government contracts or through indirect expense pools applied to federal government contracts.
A company is not prohibited from incurring unallowable costs, but they cannot be recovered either directly or indirectly under federal government contracts. To manage unallowable costs, separate accounts must be established for these type expenses and they must not be priced directly into federal government contracts during the proposal process.
Such costs cannot be made a part of the expense pools which are applied to federal government contracts through an overhead, material handling or G&A cost allocation at accounting period close or during forward pricing rate planning. For more detail on unallowable costs please see the following article:
Integrate Pricing With Technical and Management Approaches
Establish price targets as soon as possible for major tasks, evolve a program plan, or if you are bidding a T&M, IDIQ type program develop a sample work order for a typical representative effort.
As the technical and management proposal move toward completion, use established checkpoints to evaluate the efficiency of your cost estimate, escalation factors, labor, material and other direct costs. Then apply your indirect rates and subject your total proposal to a credibility check with regard to a believable cost estimate considering your solution and its time frame.
Run your competition price model and bring in some outside experts to review the end product proposal “Cold” before it is submitted.
Manage Best and Final Offers (BAFO) Carefullly
Most government solicitations require a format and terms and conditions with submission that permit contract award without further discussion. However, many involve a down-select process, briefings by those selected in the “Competitive Range”, a call for best and final offer (BAFO) or negotiation to achieve a final price.
The best and final offer period is a sensitive time. Most contracting agencies that call for a BAFO will cite weaknesses or concerns in the selected contractor proposals. They wish to hear about solutions to those weaknesses during BAFO briefings and require a re-submitted offer to correct them. The price may be adjusted as well and that is a key consideration. Pay particular attention to the way the BAFO instructions and concerns, specific to your down-selection, are worded. Look for hints that indicate critical opinion about your pricing, and then adjust your costs.
Consider the cost, schedule, technical and past performance implications of the BAFO request letter from the government and revise your proposal by the required submission date. Close the loop on all matters with your suppliers, subcontractors and prime contractors, and then conduct your briefing to the customer when it is scheduled. Present a united front to win. Your price should be your best. You will not be offered a chance to bid another competitively on that program.
On some procurements you may be asked to undertake additional discussions to determine final contract pricing. Please see the negotiation template at the following article for guidance on that process:
SUMMARY
This discussion has conveyed how pricing should be a natural outgrowth of the organization structure, market strategy, competitive analysis, business system design and long range planning.
We have further explained how your long and short term pricing factors should be integrated with the management and technical elements of any given proposal. Take the long and the short view of your business by integrating long-term company strategy with short term proposal objectives”
Comments